3D prints and CADs Part 2 - by petition2God

Tetrapod (concrete breakwater or wavebreaker) in 1/35 scale made. 7.8 metric ton version.
Added seam lines and a lift ring on the top.
Played with putting random holes on the surface but it became too tedious, so I left the rest for DIY.







Reference photos:


1 Like

I hope your recovery goes well.

2 Likes

With this inspiration, I have uploaded STL files of toilets in 1/10 and 1/35 scales.

3 versions were made:

  1. One with the lid down
  2. One with the lid up but clean
  3. One with the lid up with a human 3D print in it









Reference photo:

3 Likes

Oooh, bet you could sell a version of that to the Naval Aviation guys:

5 Likes

“Dump its load” has a new meaning! :laughing:

3 Likes

So out of curiosity, I had asked an AI-generator website to create a 3D figure of Lieutenant Colonel Kilgore from Apocalypse Now using the photos below:

Here are some screenshots of the STL model:




Would any of you buy this STL for 5 USD if I were to buy this design and upload it to my Cults3D page (in 1/35 and 1/16 scale)? Of course, it would need some revising to make it more accurate.
It is going to cost me 12 USD initially to download it. That means I need to sell at least 3 times to break even. Not sure if it would be worth it or not.

But I must say AI is impressive.

3 Likes

There’s a guy in my model club who probably would! He’s an avid Vietnam modeller, and an avid 3D printer too.

1 Like

I’m interested.

1 Like

I would be down for at least one.

1 Like

Happy to see you back.

1 Like

OG M1 Abrams sprocket made - it appears none of the existing kit parts look accurate. At the same time, the wheel hub is mostly hidden from a full view due to the side skirt armor covering the sprocket. Like this:

The retainer ring STL will be included as a set because, from what I’ve seen in the reference photos, the OG M1’s all had them.




I don’t think the embossing on the wheel hub will be shown in 1/35..

A separate STL file for the wheel hub only is included if the user wants to do some “plastic surgery” to the Tamiya kit part A8 (devoid of any hub details) or Panda kit part C24 (which is a bit overscaled in my view) or simply attach to RFM kit part A10:

Ancient Tamiya M1

Panda C24

RFM A10


Reference photos


CAD screenshots:




Available on my cults3d page.

2 Likes

I am also currently working on M981 FISTV’s antenna guard and antenna matching unit (for the 1/35 Academy kit) as shown below:

The Academy kit may be out of production though. :smiley:

4 Likes

You know what is totally missing from any 3D designer as far as I can find, is a simple duffle bag. There are no WWII/Cold War single handle, nor modern double handle duffle bags that I can find. They would be pretty easy to make and are much needed, I think anyways. I know I would buy the files.

1 Like

As with any designs I need the reference data. Several reference photos and the w, l, h dimensions. Without them, the suggestion is not helpful.

Two strap modern duffle bag. Approximately 34" tall by 14" in diameter.








The bottom is square-ish.

Top clip.

WWII/Cold War single strap duffle bag. Same dinemsions as above.






2 Likes

Legend makes very nice duffels that I’ve even made molds of.
The latest duffel has been out since 2013 and look like this:

3 Likes

Yes, I know about Legend’s and have made molds of them too. I would rather print my own.

I know about the side-zipper duffles as well, but am not interested in that type. Someone will be though.

Maybe a set of files with all three types. That would be good too.

And that’s exactly why I mentioned them.
By the way, I can tell you from experience, since you’ve made molds, it’s way easier to crank them out that way than 3D printing - far quicker, ;less expensive, less waste. What are you using? I crank out most items at a rate of three minutes per.

No issue casting/molding them. I just prefer 3D printing at this point. I can set up 25 (or however many I can fit on the printer), walk away for an hour and do something else, come back and they look great.

1 Like

The shape is too organic, and digital sculpting is not something I can do. My CAD skills are limited to hard surface geometric shapes at this time.

There is a file out there for the WWII version it seems: https://www.cgtrader.com/3d-models/military/other/military-duffle-bag

I hope it works out.

1 Like