Foxhopp: New British Figures | Armorama™

New figures of British Policeman, Bomb Disposal Operative and RMP.


This is partial text from the full article (usually with photos) at https://armorama.com/news/foxhopp-new-british-figures
2 Likes

Well, I’m not into displaying models relating to NI (too many memories!) but the RMP figure could easily fit into my Cold War themes. The green combats could even be painted in DPM, and with a bit of work he’d be useful. I say “bit of work”, but Jeez, how difficult is it to get right?

The trousers are missing a map pocket on the left thigh; the belt is, well, I’m not quite sure what; the extra loop near the buckles needs to go. The early respirator case for the SR 6 is quite well done but this was a design which could not be clipped on to or looped over, a belt. That said, it looks like the sculptor has modelled the straps wrapped around the belt so that would work; it’s what I used to do with mine if I wasn’t also carrying NBC kit.

There appears to be an extra “tab” or something below the fastener on the respirator case too - totally spurious.

The boots are laced wrong, or as far as I can make out, and God alone knows what the representation of Anklets, Web are (gaiters if you must).

And for some reason they’ve truncated the rank stripe (of Lance Corporal), so the ends are wrong - of the chevron.

And lastly, where oh where is the weapon sling?

I mean, what’s the matter with these people (Fox Hopp)? There’s more than enough kit out there - either in museums or in military kit surplus shops - to facilitate an examination of the real thing, but no; they clearly can’t be bothered, and cobble something together and then “print” it all off.

I will probably get one, or even a couple as I can envisage them on exercise at a checkpoint alongside a Land Rover, but as I say, they’ll need work.

I don’t feel qualified to comment on the ATO or the Copper.

6 Likes

Subject to Boots’ comments, I would say the RMP is fairly accurate for around 1969/70 (but the cap peak should be flatter). The RUC officer is pretty good, there would be a lanyard attached to butt of the Ruger and I’m assuming that the main part of his radio is underneath the body armour. I have a lot of memories of NI as well but I enjoy modelling the subject. Treating it as history helps me to externalise it, or something.

4 Likes

I hasten to add I’m not referring to any trauma, more to the intake of alcohol, chasing women and trying not to get murdered at the weekends - or on the way to work come to that(!)

4 Likes

I’m off on my annual trip up to Telford (UK) where I see Foxhopp have a trade stand, so I’ll be paying them a visit. I have their excellent turret for the Ferret and one or two figures, so I expect to not come away empty handed!

1 Like

Terry,

Good luck with Telford - I always find it more of a trade fair than a model show - and the lesser for that, but to each his own.

You might broker a line such as “My mate Brian says…”.

Seriously, I will always offer advice (!) if they accept they need it, but having worn and used most of what they’re portraying might almost be in a unique position to enable them to see the error of their ways. Almost unique that is(!)

2 Likes

Thanks Brian,

Not sure when you last visited Telford, but this year there will be over 220 clubs and special interest groups displaying (each one akin to Stonehenge Modellers), just over 30 overseas clubs, 15 guest displays (like MAFVA and BMSS for example) and around 150 traders from the likes of Airfix and Eduard right down to smaller one man bands. The event is spread over 3 vast hanger like halls plus a couple of restaurants and the competition area. Food in the event can be pricey, but decent other eateries are all within 5 minutes walk.

I tend to go up and stay 3 nights over the 2 days (Sat and Sun) as there is much to see and most importantly for me, many people to catch up with and talk models. It has become my event of the year in that regard. I’m representing Wessex IPMS (aka Poole Scale Modellers), with 3 of my colleagues.

The bars and restaurants of Telford and surrounding villages come alive at night with the buzz of modelling talk!

And lastly of course one of the biggest selection of models on display I’ve yet to see. Many of the overseas clubs have suggested one of the biggest they have seen too (and that includes some of our US visitors.

I’m sure you can tell, I love it!

4 Likes

I’m sure you’ll enjoy it Terry.

For me though, our biggie is the Belgian effort though obviously I’m not attending this year.

Anyway, as I say, enjoy it and give Fox Hopp a kick up the fork from me!

2 Likes

Isn’t the map pocket on an older style of uniform? I think this is the uniform they were going for. But I admit it’s not something I know much about.

2 Likes

They messed up - there is a map pocket on the LH trouser leg:

If you study the pic you posted you can just about make them out on all 3 figures.

It is something I know a lot about; I wore them for around 4 years(!)

3 Likes

Yeah, I see them now. They are more off to the side than on the older style it seems.

1 Like

Jay, can I ask what the older style you’re referring to actually is? Do you have any pics - I may be able to identify them?

1 Like

That has to be the worst print jobs I have seen as an advertisement. Usually you show your best printed figure. See the break line running down the right sleeve then forearm. That is a printer hiccup and they had to use that for their release photo. Just sloppy!!!

2 Likes

2 Likes

I see what you mean about the imperfections on the figure there. I bought the 90s RUC guy (and the EOD tech plus some of their 60s/70s RUC figs) and I didn’t notice any imperfections in the printing.

I didn’t notice any imperfections in the other figs I mentioned either. As you said, must have been a printer issue- don’t know why they are using that pic!

2 Likes

Aha, WW2 Battledress; with the blouse collar tailored to facilitate a collar and tie. Map pocket obviously where it is.

Replaced with 1949 Battledress in, well, 1949, as both a combat and walking out dress.

The green combats came into use in Korea, driven by sheer necessity, and then became issue post the Korean War Army wide, though this took some years to achieve. At times, combat dress was only issued when required and was stored as a pool item (that is, not issued to individuals but kept covetously by Quartermasters until say, required for operations or exercises; the sheer parsimony of the British Army knows no bounds!) Battledress soldiered on until the early 60s as a parade dress until replaced by the No 2 Dress tunic and trousers.

When I joined the RAOC Junior Leaders Battalion in May 1969, I was issued 2 suits of the green combat dress, No 2 Dress (again 2 suits) and 1949 pat Battledress - again x 2. I won’t bore you with everything else, save most of it had to be ironed or pressed, or starched and polished to within an inch of its life!

The camouflaged Disruptive Pattern Material (DPM) combat uniform came into service in 1969, being issued to infantry units first, deployed in Northern Ireland. I was issued mine in 1972.

3 Likes

I wanted to do a bit of research before posting this because I remember seeing the RUC with a good deal more gear on the belt than the figure. As you said Steve the Ruger had a lanyard that looped into the duty belt (I think). There was also a pouch for extra rounds (usually in a speed loader) plus cuffs, maybe a truncheon and radio. The radios of the era seem to have been quite chunky- almost brick like- most pics show them on the back or side of the waist belt. There was also a wire going to the handset and sometimes one from the handset to an earpiece.

At times it would appear a radio was not always worn- plenty of pics without them being used. So the fig, as it is, is not complete in some respects. I’m not complaining though- as it is the only fig of the era in this scale!

1 Like

All true about the RUC equipment Karl. Foxhopp actually do several other RUC figures- mostly fairly poor. The only one that is any good seems to be wearing some kind of strange handcuff pouch (?) rather than the Walther holster that would be appropriate.

2 Likes

If it’s one of the 60s/70s era RUC guys then I probably have them too and I think they may be lacking some equipment or sporting odd bits of kit. I think the mouldings themselves are good- just lacking some of the smaller details.

1 Like

I have to add a proviso here, not that I’m letting FoxHopp off the hook with their lack of attention to detail, but it may be that in 1/35 the problems I identified with the RMP figure are too small to be a worry, or, otherwise easily fixed. I’m well aware that bootlaces may be such a case in point; but it wouldn’t have killed them to get the belts right, the gaiters done correctly (or replace them with puttees), and well, the rank stripe - I mean come on!

Would an SMG sling have been too difficult in 1/35? I thought that 3D printing meant wondrous things could happen - I mean - just look at the stuff DIACCS pushes out - no figures I admit.

I did mention earlier that I thought they would lend themselves to a decent BAOR scenario such as at a checkpoint with an adjacent Land Rover of the right type, but I’d almost forgotten Berlin. Those who recall my RMP Munga at the emergent Wall dio a few years back, may remember these reference pics I posted at the time:

You could also add an Airfix Ferret say as well; job done - an almost instant Berlin Wall/IGB dio!

If you require a bit of Wall then AFV Club to the rescue:

or even make your own.

2 Likes