Just so everyone who tracks this page is made aware, I slightly changed the title. Removed the “Looking for…” Just to try to make the title less cumbersome. I’m still always looking for suggestions and ideas.
1 Like
Man, everything is looking great. My wallet will be hurting soon.
2 Likes
I’ll definitely see what I can do to keep the cost down. Right now though, I’m running a test print to test the fit on the kit that you sent me. If everything fits correctly, I can continue without having to make large structural changes. Plus, I can test the seats to see if they fit into the locating holes. The windows are filled in just to keep the whole thing strong structurally while I work with the test. After everything is fit correctly they’ll be opened on final prints. I’ll need to get clear resin for the windows.
3 Likes
The LTAS dashboard is coming along pretty nicely.
And the radiator grille as well.
Also, a small detail underneath the side step. I’m not sure if it’s accurate, I’ve never seen any pictures underneath this step but the braided wire cable has to affix to the step somehow.
That large panel was looking a little dull so I just added some detail to it.
4 Likes
Coming along really nicely.
1 Like
I teased this earlier, but I didn’t want to announce it until I knew it was finished, correct, and printable. Well now that it is, I’m more than happy to present the Cleared LAne Marking System or CLAMS. I have this modeled in 1/35 for the M60 but I do plan on doing the mount for the Abrams as well. I just can’t find any references to use for the Abrams mount aside from the old Dragon M1A1HA kit and a Concord book drawing. @18bravo @SableLiger I’ve seen you guys express interest in this before, any thoughts?
For a set of 1, consisting of 2 parts, the bracket mount and the CLAMS box, it’s $10.
And here are some actual pictures of the CLAMS.
3 Likes
Oh yeah. That’s the missing pieces to my M60A1 RISE
Very nice. You beat me to it, Mike. Good work.
The TM for the CLAMS is
The NSN of the adapter is seen on the front page but I did not manage to source out any kind of drawings. Vodnik had posted a link to the manual in the old forums but it does not work though.
2 Likes
Thanks. This was a tough one with just barely enough information to finish it. The box itself was easy. The mounting bracket was tough.
Kinda need to know what it is first.
look up syrian sarab.
1 Like
on Cults3D you can find the STL file of both version for the SARAB
I just shipped out 2 HEMTT light sets to Europe and shipping came out to a whopping $81 for both of them. Unfortunately, I think I have to institute: A) a minimum order amount of $35 for shipping internationally, and B) any order below the minimum going international will have to have a shipping charge at cost. Shipping domestic doesn’t need a minimum order amount. I typically factor in domestic shipping into the price for everything already, international shipping is just much more expensive.
Now I have another gun to announce! This time a “Type 1” AK-47. I wanted to switch things up from my current projects and work on something quick for a little bit. This was designed using AK-47/AKM blueprints so it’s completely accurate. It will be available in 1/16 and 1/35 like shown here. Next I’ll be making the Type 3 and then the AKM. I’m skipping the Type 2 because it wasn’t all that common and there are very few differences between it and the Type 3. At least none that will appear on the prints. As with all my 1/35 gun sets, it comes as a set of 6 with 12 magazines. 1/16 sets come as sets of 4 with 8 magazines.
Some tie downs that printed pretty well. These will be sold as a set of 100. There’s 10 to one row so… 10 rows, 100. Because there’s so little resin used and it takes so little time to print, it’s probably only $5 or $6 plus shipping.
And now for a 1/16 M4 carbine. This one has a CompM2 with an AN/PAQ-4C laser designator and Surefire M600 Scout light.
A different M4 carbine with a M150 ACOG, AN/PEQ-15 laser, Surefire M951 light, and M203 grenade launcher. But you can see the honeycomb of the anti-reflection device. I think it came out pretty well.
And I just want to make it known, that everything I sell and show off here is designed solely by myself. I never download anything to print and resell. I do download things from time to time but they’re always for my personal use and I don’t resell them. Like this little shark. I downloaded and printed him to give as a gift to my manager who’s moving locations.
4 Likes
Tie downs, yes…
2 Likes
I’ll shoot you a PM.
If anyone wants anything that I offer, shoot me a PM. I’ll be posting a price list here pretty soon.
2 Likes
The price list is here. It’s pretty long because I have so much available. There’s a lot that I didn’t list because I haven’t priced them out and they didn’t seem to provide enough to list them. There’s some without prices here that I haven’t priced yet but they did seem significant enough to warrant listing them.
1/16:
-
MSP16-017 1/16 SINCGARS Radio Set $19.89
-
MSP16-021 1/16 EoTech Holographic Sights Set $9.70
-
MSP16-022 1/16 Pintle Hitches Open/Closed $9.20
-
MSP16-023 1/16 HK M27 IAR x4 $16.36
-
MSP16-024 1/16 Mk 18 Mod 1 x4 $17.60
-
MSP16-025 1/16 Mk 18 Mod 0 x4 $17.60
-
MSP16-026 1/16 M4A1 Carbine x4 $17.80
-
MSP16-027 1/16 M4A1 Carbine w/ M203 x4 $17.60
-
MSP16-028 1/16 PEQ Set $8.28
1/35:
-
MSP35-002 1/35 AN/VIC-3(V) Intercom Set $10.13
-
MSP35-003 1/35 AN/VIC-5(V) Intercome Set $10.81
-
MSP35-004 1/35 AN/VIC-1 Intercom Set
-
MSP35-007 1/35 M3 Stuart Headlight Guards $7.54
-
MSP35-013 1/35 AN/VIC-2 “Pre-SINCGARS” Intercom set
-
MSP35-014 1/35 AN/VIC-2 “Post-SINCGARS” Intercom set
-
MSP35-022 1/35 M1068 Auxiliary Power Unit $13
-
MSP35-025 1/35 SINCGARS Radio Set $9.87
-
MSP35-028 1/35 M85 .50 Cal Machine Gun Barrels $8.31
-
MSP35-030 1/35 AN/VRC-12 Radios
-
MSP35-032 1/35 Shillelagh Missles
-
MSP35-034 1/35 CheyTac M200 Intervention x2
-
MSP35-035 1/35 CheyTac M200 Intervention w/ Suppressor x2
-
MSP35-040 1/35 McMillan TAC-50 x2
-
MSP35-042 1/35 NATO Slave Cable Ends
-
MSP35-043 1/35 M256 120mm Gun for Meng M1 Abrams $13.22
-
MSP35-044 1/35 US General Purpose First Aid Kit $6.55
-
MSP35-048 1/35 Classic Coke Bottles $6.49
-
MSP35-051 1/35 HCU-6E Pallet x1 $11.50
-
MSP35-052 1/35 Plastic Bottles $6.41
-
MSP35-053 1/35 Soda Cans $5.50
-
MSP35-055 1/35 Reconfigurable Integrated Weapons Platform (RIWP) Turret kit
-
MSP35-057 1/35 QF 183mm/L4 Gun Barrel $15.52
-
MSP35-059 1/35 Tie Downs x100 $5.49
-
MSP35-071 1/35 AN/VRC-110 Radios $9.95
-
MSP35-072 1/35 AN/VRC-111 Radios $8.87
-
MSP35-073 1/35 RPG-29
-
MSP35-075 1/35 PPS-43 SMG
-
MSP35-084 1/35 M110 SASS x6 $12.40
-
MSP35-086 1/35 FN SCAR SSR Mk 20 Mod 0
-
MSP35-087a 1/35 SIG Sauer M17 MHS $6.72
-
MSP35-093 1/35 Tavor X95
-
MSP35-094 1/35 L129A1 Sharpshooters Rifle
-
MSP35-095 1/35 M110 SASS w/ AN/PVS-27 $12.40
-
MSP35-096 1/35 Gun Display Units (for M777 and other towed artillery) $8.50
-
MSP35-098 1/35 SIG Sauer XM5 NGSW x6 $14.52
-
MSP35-099 1/35 Insurgent Makeshift Gun Shield $14.00
-
MSP35-101 1/35 Mk 18 Mod 1 x6 $10.30
-
MSP35-105 1/35 HK M27 IAR x6 $12.40
-
MSP35-106 1/35 Mk 18 Mod 0 x6 $10.30
-
MSP35-107 1/35 M4A1 Carbine x6 $11.30
-
MSP35-108 1/35 M4A1 Carbine w/ M203 x6 $11.60
-
MSP35-109 1/35 M16A4 x6 $12.40
-
MSP35-110 1/35 M16A4 w/ M203 x6 $12.70
-
MSP35-111 1/35 M16A2 x6 $12.40
-
MSP35-112 1/35 M16A2 w/ M203 x6 $12.70
-
MSP35-113 1/35 M16A1 x6 $12.40
-
MSP35-114 1/35 M16 x6 $12.40
-
MSP35-115 1/35 PA-120 40mm Ammo Cans $10.00
-
MSP35-116 1/35 30-ton Tow Shackles x6 $8.50
-
MSP35-117 1/35 HCU-6E Doubled $14.75
-
MSP35-118 1/35 Larkspur Radios $8.87
-
MSP35-119 1/35 Vehicle Side Marker Lights x60 $6.00
-
MSP35-120 1/35 Mermite Insulted Food Containers $10.74
-
MSP35-121 1/35 Bremer Wall Type 1 Base x2 $16.90
-
MSP35-122 1/35 Bremer Wall Type 2 Base x2 $16.90
-
MSP35-123 1/35 Bremer Wall Type 1 Short x2 $12.80
-
MSP35-124 1/35 Bremer Wall Type 2 Short x2 $12.80
-
MSP35-125 1/35 Texas T-Wall Barrier x2 $16.90
-
MSP35-126 1/35 Texas T-Wall Short x2 $12.80
-
MSP35-127 1/35 Japanese Lunge Mine x6 $10.00
-
MSP35-128 1/35 CLAMS System $10.34
-
MSP35-129 1/35 AK-47 x6 $11.30
1/350:
- MSP03-006 1/350 USC-38 and WSC-65 SATCOM Domes $7.34
1/700
- MSP70-007 1/700 USC-38 and WSC-65 SATCOM Domes $6.07
5 Likes
Are your tie downs same as footman loops?and can you show pic of mk18 mod 0 and can you make the 40mm cans open and also separate 40mm rounds,I can fab the belt with tape