Finished Photos of Wingnut Wings’ 1/32 Scale Jeannin Stahltaube German WW1 Recon Aircraft

Fellow Modelers,

Below are photos of Wingnut Wings’ 1/32 scale Jeannin Stahltaube German Reconnaissance German WW1 Airplane finished about two weeks ago. I do not build WW1 aircraft very often, however my attention was drawn to the beautiful lines of the Jeanin Stahltaube, as it reminds me of the early fragile and elegant airplanes built before WW1 began. This was a great kit and went together with no major issues. Except for adding two pieces of small electrical wire for a vent tube and fuel line, the model was built straight from the box.

The development of the Taube (Dove) aircraft is convoluted and complicated. Since the first designs were based on a previously published aeronautical research paper, a patent for the first successful aircraft (Etrich II Taube in 1910) could not be secured. This meant eventually dozens of aircraft manufacturers were building their own variations of the Taube design. The Wingnut Wings model is based on the 1914 “Military Type” design, which was ironically created by a Frenchman named Emil Jeannin. This version became one of the more numerous designs supplied to the German military. It featured a steel tube framed fuselage (hence the name Stahltaube or Steeldove). The Jeannin Stahltaube was classified as an unarmed monoplane aircraft (Type A) and utilized for reconnaissance, although small bombs and personal firearms were eventually carried by the crews. The availability of more suitable bi-planes in 1914 (Type B) and then more powerful, armed aircraft (Type C) meant that no Jeannin Stahltaube machines remined in frontline service after the middle of 1915. After that any surviving aircraft were relegated to training units. One of the photos shows the 1/32 Jeannin Stahltaube and a 1/32 Hobbycraft SPAD XIII side by side, which provides a good size comparison and shows what a really large aircraft the Jeannin Stahltaube was. I hope you enjoy the photos.

Phillip1

14 Likes

more photos1…

11 Likes

more photos2…

12 Likes

more photos3…

14 Likes

You have done a lovely job indeed of a superb kit of a beautiful aircraft.

Very well done

Keith

1 Like

I love the intricate rigging and engine details. Outstanding work overall! :star_struck:

—mike :hammer_and_wrench:

2 Likes

Hi Phillip

That’s absolutely gorgeous! Wonderful job! :smiling_face_with_sunglasses:

All the best

Rowan :beer_mug:

2 Likes

Really beautiful models from Wingnut Wings. I had always considered purchasing one (or two) of their kits when they were available only from Wingnut Wings in New Zealand. Apparently I waited too long…Now they cost at least twice as much from 2nd, or 3rd party sources. :enraged_face:

:grinning_face: :canada:

BTW…were they actually being produced by the Chinese company, Meng? I seem to remember that the Fokker triplane (currently released by Meng) was supposed to be a Wingnuts brand release before Wingnuts ceased production under their own name.

As a point of interest, Wingnut Wings was owned by Peter Jackson (Lord of the Rings, The Hobbit, and other productions) who is a big fan of WWl aircraft, and also owned a company restoring them!

3 Likes

Wonderful job! It looks really great. I have this kit in my stash. The only WNW kit I own. I’ve been hyping myself up to tackle it. Your build may be the inspiration I need. Thanks.

2 Likes

That’s a beauty! Congratulations on finishing.

I really need to get their Rumpler I started in lockdown finished.

1 Like

Very fine work! Terrific detail.

1 Like

kornbeef-Thank you very much! I agree it is a beautiful airplane!

Phillip1

Mike-I appreciate the kind words!

Phillip1

1 Like

Rowan-Thank you! I am glad you like it!

Phillip1

Biggles50-I agree the Wingnut Wings model kit are very high quality (same or better than Tamiya and Hasegawa). I am pretty sure the parts were made in China even though sold out of New Zealand. And yes, even though the company folded years ago many of the WNW kits are available on eBay (as long as you have a lot of coins).

I think when Peter Jackson started this company it was based on the idea of creating the finest WW1 model kits, sparing no expense and company profitability not seen as the highest goal. The way he quickly and unexpectedly shut down the operation kind of indicates he no longer thought it was a worthwhile venture. They are truly amazing model kits.

Phillip1

1 Like

Evan-Thank you for the great words! It is a great build with no major issues. I know you will enjoy building it, and when you do post photos!

Phillip1

1 Like

phantom_phanatic-Thank you! Actually, I have built their early Rumpler C.IV too. It is also a very beautiful bird with great lines.

Phillip1

1 Like

milmod-Thank you very much!

Phillip1

They worked with Border models too hence Border Models Lancaster kit. So they may have worked with several Chinese manufacturers. I wish my old sausage fingers and dodgy eyes were still capable of doing WNW kits justice as I’ve several in the stash. Good to see Copper State have stepped up and do equally nice kits.

Anyway I shouldnt distract from the superb build by Phillip here any more.

Keith

2 Likes

Keith-I may be wrong on this but I believe the Border 1/32 Lancaster was originally going to be released as a Wingnut Wings kit. A substantial amount of engineering/design work had been done when WNW closed shop. Border decided to go ahead and finish the engineering, create the molds and release the kit as their own. At the time I believe WNW threatened them with legal action since they clamed ownership of the work that had been done. I do not know how this was eventually setteled but obviously Border did issued the Lancaster kit.

Phillip1

1 Like