I had this one arrive today from Osprey Publishing for me to read and review for them.
11 Likes
After hearing everyone rave about this mini bench vacuum, I bought a refurbished model.
It seems that all they have now.
7 Likes
Although they’re out of print now, volumes one and two of the “Death from Afar” series covers USMC snipers in the Pacific. They’re available used…check ‘em out.
9 Likes
Thank you. 
1 Like
Really? Did you try Amazon?
—mike
1 Like
That’s where it came from. Works really well.
2 Likes
My 4th Harder & Steenbeck airbrush and all I can say is WOW!
The trigger action is smoother than my Infinity CR plus and the engineering is something to behold.
15 Likes
YEEESSSS!! 
Arrived today and is surely on my production list this year …
In the parcel was still some room so I added this legend to it. Revell Germany outside, ICM inside …
13 Likes
This lovely arrived on my doorstep. Been on the wishlist for years and was on sale on Amazon so finally pulled the trigger 
9 Likes
The new bridge weight plates are here!
After a grand tour of the eastern seaboard courtesy of the USPS because all towns named Springfield must be in Massachusetts…
Thanks James @Petition2God !
10 Likes
At least it didn’t make it to the Midwest. Every state out here seems to have a Springfield so you would have been waiting years 
5 Likes
Yay! Those 3D prints have been around - visiting all the important historic sites for the US independence from Britain. 
O, it did, too because it went from Denver to MA then to DC.
6 Likes
D’oh! (Somebody had to say it…)
7 Likes
I posted this originally as a brief review on the ‘Mini Cordless Drills’ page.
————————————————————————————————
Received my ‘DSPIAE Cordless Grinder’ and immediately pressed it into service last week.
Pros:
• As advertised, it works very well as a grinding/engraving tool.
• Powerful three-speed motor (5000/10000/18000/min).
• Good torque.
• Small size for access to tight spaces.
• Easy button presses.
• Good battery life.
• The included bit is very useful.
Cons:
• Comes with only one bit. Additional 3mm shank bits sold separately.
• Does not accept standard 1/8" shank bits.
Workaround: In order for the motor to accept my 1/8" shank bits, I reamed-out the chuck to 1/8" diameter. It now accepts my other bits.
Disclaimer: I have no affiliation with the company and I am fully aware that modifications void any warranty and do not officially recommend the procedure.
—mike 
9 Likes
You can purchase the complete set of bits, as well as all the sanding discs, from Dspiae’s official store on AliExpress for very cheap. The sanding discs are very useful, with 2 different diameters and 4 different grits.
4 Likes
Michael,
I ordered one too and am pretty darn impressed. It worked very well removing resin. Very controllable and light.
Worked great enlarging the opening in a resin mantlet for a metal gun barrel that was designed to fit.
5 Likes
Some goodies for my Sheridan (got hold on Masterclub tracks 
)
Some British canisters for my Crusader and one old cossack
9 Likes
Where did you get those tracks? I am looking for the T41 tracks of Masterclub.
1 Like
love thier books i got the one on the Iraqi Abrams and vol2 of the M1a2 SEP V.2 in europe both came with decals
its a shame they are no longer printed great refewrence materieal
1 Like