Allied trucks

Yeah, SW in the States gets a lot of well-deserved flak about its crazy shipping! Nothing beats a “one size fits nobody” system…

Darley Water Pump arrived today from Shapeways. (A day earliy for my birthday.)

The print is beautiful. Very delicate but very well done.

At work now but photos to follow this evening!

Always enjoyed the soft skins a military uses. Moving Boots, beans and bullets is how wars are won. Plus it opens up a whole new world of possibilities like Gun Trucks, Tank Haulers and loads of “Jeep-like” vehicles. Everything from any era. I especially like the ‘Shop & Comms’ mods.

Again, the Darley water pump printed beautifully!

It is really so small it was somewhat hard to photograph.
I tried photographing it in its original natural translucent plastic state but the detail just did not show up. So what you see here has been sprayed with Tamiya (Rattle Can) gray primer to give it better contrast.

In the process now of giving the pump its’ final OD paint work.

This final shot is the rear view of the pump.

Kudos Tom for your fine craftsmanship here!

Photos of the real deal:
There were various arrangements of dial gauges and valves.

My photo above

Final paint: (No Dust Weathering ~ Yet!)


Wow that really pops with paint on it! By the way it’s not just the gauges and hoses that come in a wide variety - the same applied to the front bumper modifications. Some (like your pic) have the bumper “dropped” under the frame, others have it turned upside-down to place the open square upwards (for access to the brass cover on the hydrant inlet), and still others have keyholes in the bumper face. Makes for a lot of fun modelling!

1 Like

Well the bumper with the retangular cut out is actually just the winch bumper turned up side down.

I was highly impressed by the “keyhole” bumper but would be hesitant to ever try and model that one. Also the one in my photo was the first time i had ever seen a reenforced scalloped curved cut out like that.

The wrecker version of the LWB CCKW as seen just this past weekend (Oct. 1-2, 2022) at the Bowman Field Annual Air Show in Louisville, Kentucky.

The most original and complete US vehicle I think I have ever seen, AND with Banjo Differentials!

All photos by the author ~ All Rights Reserved

And a few more photos from the Bowman Fest Air Show thrown in for good measure:


That truck is great! With the Tamiya kit as a base (wood bed, open cab), their gun ring set, my banjo axles and banana bar, and the wrecker set (I think somebody did offer it in resin?) you’d have a neat little project.

1 Like

Tom, someone offered it in resin. Wish I had picked it up when I could have back then. Went with the resin dump body instead.

That was Real Model’s kit 35096,“GMC CCKW 353 & Wrecker Set” - maybe still available somewhere online?

1 Like

I have an unopened resin dump body conversion kit for the CCKW squirreled away in the stash that I am never going to get to. In case anyone is interested.

Make me an offer.


Which one? I’d be tempted, though the postage would be extreme…

Hi all,

I’ve been designing up some fire equipment for WW2 fire trucks - classes 135, 325, 335, and 530. A set of extinguishers and other externally-stowed tools can be found here:

Darley pump: 1:35 Darley water pump for Class 325 fire truck (6ZGWXQE8S) by barkingdigger

Barton pump:

Sirens and spotlights: sirens and spotlights US Army fire trucks WW2 1:35 (FFWXQWD2W) by barkingdigger

Hose reels for the sides of the trucks (not mine, but why reinvent the wheel?) can be found here:

Hope these are useful!


DO NOT know how I missed these posts !!!

Great stuff!

Well I guess when you drill a hole in the radiator of your brand new MiniArt Chevy one and a half ton truck, the die is cast; you’re going to build a fire truck!


You guys might also want to check this one out:

1 Like

Showing my discovery of these realistically beautiful base mats distributed by MIG elsewhere on this site. (Made by Model Scene.)

So here is an Allied White 666 truck converted to a semi-tractor.

Just bumping up this thread with a small shot in the arm.


Discovered this while researching WWII welding trailers, which is what that last color photo on the right is. The arc welder is made by Hobart.