M60A1 Build

My latest project in an early M60A1 somewhere in Europe in the '60s. It is sort of a Franken-M60 as I am building it from left over pieces-parts from other kits and gathered parts. It will have T97E2 tracks, aluminum road wheels and side-loading air filters.

I got the idea to build it when I was building my recent M60 AVLM. The Dragon M60 AVLB kit comes with two complete hull shells. I took the extra hull and started looking through my M48/M60 parts box and found most of what I need left over from other kits I had built. I did need a turret shell which someone here (sorry, I forget who) generously donated, along with a few other parts.

The turret is I think Academy. Sandy parts may be Tamiya. Not sure on the dark green parts, maybe AFV Club? The barrel is left over from the Takom M60A3, which includes both the complete thermal covered and a complete bare barrel. The engine cover is a resin one left over from a Verlinden engine set. Other parts are either 3D printed or scratch.

Here it is so far. You can see all the different colored parts.






The drive spockets have 3D printed outers with mud release holes on Dragon inners. The jerry cans are also 3D printed. Spare roadwheels are from Tamiya’s old Modern U.S. Army Accessory Set (35141), which I drilled out the lug holes on.

I also have a full set of the aluminum road wheels on the printer now. They will be done soon.

So far, it is coming together well.

19 Likes

A true kit bash.

2 Likes

Looking damn excellent Gino. Outstanding kitbashing and a nice solid build.

Kind of what I did with my M60A3TTS tank. I used parts from three kits, plus a FE scratch built parts.

8 Likes

I do so like this sort of modelling - getting the best form what you have; 'looking forward to the end result.

2 Likes

Now that is very nice Reynier, very nice; where does that camouflage scheme place it?

2 Likes

Thanks gents. I too like using extra parts to make a full model.

2 Likes

A few things, add grooves on either side of driver’s center periscope ( for rain water removal) delete those ribs which are supposed to be latches for the sponson boxes, AFV club kits have much better ones I think for an early M60 A1. You can drop the center driver’s periscope down, so the driver can see easier when driving with his head out.

3 Likes

Thanks, I’ll see what I can do. The handles will have to remain though as I don’t have any to replace them with.

1 Like

You can make handles from thin wire. I would use the wire from s loaf of bread wrapper end.one end into a hole and the other end having a short curve

2 Likes

Good idea; for once, when I was tarting up mine, I took the easy way:

5 Likes

I found a file for the handles and printed them up myself. It looks really nice. Closed the driver’s middle periscope and added the drain lines as well. I’ll take some more pics later.

3 Likes

Now you need to add raised periscopes for the two sides of the driver. They stay in the up position.

Ken

1 Like

Yup, the outer ones are still up. I had all three up to start with.

1 Like

The tank represents an M60A3 of the 3rd Armored Division (SPEARHEAD) during REFORGER 85, “Certain Shield”.

3 Likes

Thanks for that; I should have sparked a little when I saw the large numbers.

1 Like

A small update. I fixed the drivers middle periscope and added drain lines. I also swapped out the sponson box handles w/3D printed ones.


I printed the aluminum wheels too.

10 Likes

Very nice so far. The M60A1 was the hog I spent a good deal of time on. You need a sleeping bag rolled out on the front finder and a canteen cup full of coffee. :slightly_smiling_face:

4 Likes

https://www.etsy.com/listing/1379676859/dino-tanker-cav-colors-patch-b19

1 Like

Haha, that’s awesome!

1 Like