NEWS: Umosamon TYPE 61A5 Main Battle Tank 1/35 Scale Model Kit

Following on Bandai’s “Gundam, U.C. Hard Graph” line, the Umosamon 1/35 TYPE 61A5 MBT is cheaper as the Bandai version can be well over $100 USD. To be released after the New Year, 2027. Shop around for the best prices…

https://www.usagundamstore.com/products/type-61a5-main-battle-tank-1-35-scale-model-kit?utm_source=Klaviyo&utm_medium=campaign&_kx=t0dJ8QtUjPeRjmXbu2ndyUasJIDSWIXIF-u_W54t1EA.QPkpvt

12 Likes

Great that there will be another kit available soon and hopefully cheaper than the current going rate for the Bandai kit.

I do have the Bandai 1/35 M61A5 Semovente MBT kit but I got mine many years ago before the ridiculous high prices they are going for now. I started it years ago but never finished it. One problem is that I am still trying to decide what RWS I want to put on the turret. I test fitted the Live Resin SECUTOR but it can only fit over the commander’s hatch which will then not have a top hatch anymore. We have unmanned turrets now so not really a problem if I go that route. I also test fitted the Bronco M153 CROWS II with a Live Resin .50cal which is in front of the hatch but offset to the side a bit. Another problem I had was deciding if I wanted to scratch build up the areas by the sides of the hull/turret where there are huge gaps/shot traps. The biggest problem I have though is nowhere to display it as it is pretty big.


5 Likes

In comparison, including the gun barrel, a 1/35 scale Merkava IV is 26 cm long by 10.5 cm wide.

At 33 cm long by 14 cm wide, this tank is huge. In real life, including the gun barrel, it would be about 38 feet long.

A real life Gundam is about 80 feet tall so this tank is still a pipsqueak compared to one of those.

4 Likes

Here is the hull compared to the Academy 1/35 Merkava Mk2D hull from when I first got it.

2 Likes

Great picture!

For anyone wondering, the Type 61A5 was introduced in Mobile Suit Gundam: The 08th MS Team from 1996. In other words, this was someone’s idea of a future super tank back in 1996. :slight_smile:

Edit: I found two more Gundam universe tanks with a “traditional” layout that would make good models.

Magella Eins

Linear Gun Tank

3 Likes

Two cool tanks. I especially like the Magella Eins. The Linear Gun Tank is nice too but not a big fan of the quad tracks though.

2 Likes

Agreed. I also think quad tracks are silly. However, for me, on that specific design, the quad tracks are restrained enough to pass muster.

I did not include any of the half robot, half tank designs because, from my point of view, they are over the top, silly, science fantasy.

I did find one more vehicle that interests me: TK-53 CGS Mobile Worker. It is a utility vehicle seen in Iron Blooded Orphans. The characters often use them as weapon carriers. (I am unclear if the design is a science fiction truck sometimes used as an improvised weapons carrier, or a weapon carrier sometimes used as an improvised truck!) It is not a very realistic design but still interesting. I would want the truck variant!

My selections are partially driven by what would make sense as a 1/35 scale model.

It also just occurred to me, there are all sorts of science fiction war machine models but very few models of science fiction cars, trucks, and construction machines. Someone should fix that.

2 Likes

The Border 1/35 Grizzly tank was a pretty cool concept until I saw the huge gap at the rear of the hull. I also don’t like how high the turret sits. It is still a cool looking tank but the areas I mentioned turned me off from getting one besides the crazy high price.

4 Likes

I agree with your assessment of the Grizzly. Where is the engine? The turret ring is tiny! There is no room for the gun breach to rise or depress. There is no room for an auto loader. Maybe it has a fantasy gun and fantasy power system. Dunno. Accept for the road wheels and maybe the aprons, it does not look like an American tank. In my opinion, it most closely resembles the Chinese ZTZ 99.

I am not familiar with Command and Conquer, Red Alert 2, but did watch some videos of the Grizzly in action. One video showed a Grizzly in a World of Tanks type game. That game may have provided the body plan used by the people at Border Model for this kit.

I also learned the kit comes with some electronic parts. That and the size of the model explains the price.

As with most models in 1/35 scale, if it comes along at a decent price I will purchase one. It competes with a lot of other great models in that price range.

2 Likes

This Border 1/35 Tesla Tank, the hull is based off the Russian BMPT Terminator. I already have the Trumpeter BMPT Terminator Kazakh, BMPT-72 and the Zvezda BMPT Terminator and Terminator II kits. I didn’t need another kit based off the same hull. I do build what ifs but I am also not familiar with Command and Conquer or Red Alert 2. I have only seen the Border Models kits. The Grizzly caught my attention but never got one.

2 Likes

I did a build log on the site here of the Grizzly not so long ago. They also have one called the ‘Apocalypse’ which has twin guns like the Umosamon. The electronics in both kits are a bit gimmicky (and a bit fiddly) but I think they are cool- I’m a big fan of the Red Alert games so I guess these kits are aimed firmly at me! As you guys mentioned the shape is very odd- both the Tesla tank and the Apocalypse had design influences from actual tanks but the Grizzly didn’t seem to resemble any designs- the rear in particular being very odd. It was a bit of a nightmare to paint that area too!

3 Likes

Do you have a link to your Grizzly build? Would love to see it.

I saw the Apocalypse tank as well. Not a big fan of the quad tracks but still a pretty cool tank though. While it has the twin guns, the turret reminds me of the one from the Russian T-90M. It looks very similar. Border has two Apocalypse tank kits. The second one also has twin guns but the turret looks similar to a German WW2 Tiger II.

1 Like

It’s a large kit, and I too bought mine before the steep prices. I don’t ever foresee myself building it because I don’t have the display space.

It makes sense to mount a RWS on it. I looked on ETSY and no one sells a 1/35 Sci-Fi RWS despite all the 3D-printed Sci-Fi weapons people are selling.

The UC Hardgraph troops leave a lot to be desired as they lack Sci-Fi armor and gear although I think one can find 1/35 Sci-Fi troopers on eBay and ETSY that look more futuristic.

2 Likes

Here is a link to the build log.

When I was building the Apocalypse tank I noticed parts of the exhaust were similar to the AMX-30 and parts of the plow system were similar to Pearson Engineering items. The Bundeswehr were actually testing a quad-track vehicle quite recently too so even that aspect of the design has a bit of inspiration from the real world. They were not as difficult to do as they look but a bit odd to do four track assemblies for one tank!

2 Likes

@Karl187, Terrific job and love the camo scheme.

2 Likes

@Trisaw, those Hardgraph troops look like they could be from the 40’s to the 60’s. I was thinking of adding more current crew/figures.

I found these sci fi figures on Ebay but never got them.

These were also on Ebay and are more current.


3 Likes

@twong Wow, those Ebay Sci-Fi figures look great! I am impressed and surprised.

I stopped looking at 1/35 figures a long time ago as I now build 1/25 (75mm) and above, preferably 1/16 (120mm) and 1/12 (150mm) figures as I even think that 1/24 scale is too small (car scale figures).

2 Likes

Thank you my friend :+1: !

2 Likes

Do you hand paint the camo on your larger scale figures or do you use camo decals? I am horrible at hand painting camo on figures so I use camo decals but my military figures are all 1/35. I do have a few 1/24 figures but they are mostly super heroes like Batman and so on. I also have some Aliens figures in 1/24.

I got these 3D printed 1/35 modern tank crew and Delta Force figures earlier this year from Aliexpress. They are very well detailed. I did get most of them primed over the summer but so far I only started painting the tank crew figures but still not finished. I will mostly be using camo decals on the Delta Force figures. Hoping to start decaling some of them over the winter months seeing I can’t paint during winter.

2 Likes

Tesla tank, eh? Did Musk defect to the Russians? Guess he didn’t see much future with his current BF! :thinking: :rofl:

:grinning_face: :canada:

2 Likes