3D prints and CADs Part 2 - by petition2God

[Petition2God]

All my threads were getting a bit too long or forgotten for new 3D designs and prints so I’m starting a new one for more recent CADs.

Here are some in the works - chain/load binders for transport vehicles, etc.

Attribution to: Thingiverse - Digital Designs for Physical Objects and rc chain binder by webberdude55 - Thingiverse.

Kind regards,
James

[Petition2God]

Also in the process of revising my existing TOW CAD from the newer version to earlier version:

From this:

To this earlier version:

[Petition2God]

A couple more things working on this week:

Light guards for early type M113:

Reference photo:

@Trisaw’s request, the US Army modern snowshoes:

I’ll be revising the following CAD to look like the reference photo’s.

Attribution: francescomilanese | CGTrader

Ref. photo:

Kind regards,
James

[Petition2God]

CAD for the US Army modern snowshoes done!
Anticipating a print fail for thin straps so including a separate set of 8 straps:

Reference photo:

[Petition2God]

TOW missile CAD in progress:

[Petition2God]

CAD work for BGM-71 TOW missile done - for vehicle mount:

[Petition2God]

M113 APC (da OG version) light guards CAD done. 3D printing in 1/35 may be tricky due to thinness.

Reference photos:

[Trisaw]

Impressive CAD skills, James! Those are like works of CAD art…reminds me of LEGOs.

[Petition2God]

The light guards printed OK considering their thinness. Need some TLC and clean-up:

[Petition2God]

Snowshoes printed in 1/16:

Straps have holes in them but will be a pain to remove from the supports w/out breaking:

[Petition2God]

3D printed chain/load binders. Didn’t realize how tiny these things are in 1/35.
One of them broke off as trying to get a support off - very thin in 1/35.

Reprinted Russian vehicle NBC filters and M54 gun truck accs.

[Petition2God]

I am back in business, fellow modelers. I had forgotten that I have started a new thread here b/c the other one was getting too crowded. Will post more CADs and prints here.

Kind regards,
James

[Petition2God]

Now it’s summer in the US, BBQ diorama anyone?

Cc attribution: https://3dwarehouse.sketchup.com/search/?q=grill
Landmann Grill - Download Free 3D model by elias.gustavsson [f6c60d6] - Sketchfab
https://free3d.com/3d-model/hsm0001-382845.html
These won’t print too well in 3D small scale due to their thin walls. Will need to solidify the inside.

Cc attribution: Charcoal Grill - Download Free 3D model by newArteest [1016287] - Sketchfab
Charcoal Grill - Download Free 3D model by gloryfish [7db65a3] - Sketchfab
https://3dwarehouse.sketchup.com/search/?q=grill

Unrelated genre - got a request to 3D print DsHK machine gun. Will post photos of 3D print later:

Cc attribution: dshk - Download Free 3D model by hensyu_leader [070de1c] - Sketchfab

Metro 2033 - DShK

[Petition2God]

Downloaded some backpacks and a whole bunch of weapons. Will update the CC attributions later.

CC attribution: military_backpack_-_italian_army__-_free - Download Free 3D model by InReality Solutions (@inreality) [2b4e430] - Sketchfab

Sniper weapons from Sketchfab.com

“M14 Ebr” (M14 Ebr - Download Free 3D model by 3dartist63 [4d3b43b] - Sketchfab) by 3dartist63 is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

https://3dwarehouse.sketchup.com/model/u74d6dcd5-5e4c-48a0-ad66-fd0a4fae72c1/M14-EBR?hl=en

More from Sketchfab.com

M4s, M203 add-ons, etc. from https://3dwarehouse.sketchup.com/search/?q=m203%20grenade%20launcher&searchTab=model

“M16 Assault Rifle” (M16 Assault Rifle - Download Free 3D model by Mateusz Woliński (@jeandiz) [339d0f7] - Sketchfab) by Mateusz Woliński is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

Kind regards,
James

[Petition2God]

SCAR-H from sketchfab.com or 3dwarehouse.com:

“FN SCAR-H 17” (FN SCAR-H 17 - Download Free 3D model by Skylar (@itsmeskylar) [486cb35] - Sketchfab) by Skylar is licensed under Creative Commons Attribution-NonCommercial (Creative Commons — Attribution-NonCommercial 4.0 International — CC BY-NC 4.0).

“FN SCAR-H” (FN SCAR-H - Download Free 3D model by Alex_Z [ba1c338] - Sketchfab) by Alex_Z is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

[Petition2God]

Some Russian modern weapons in 3D:

“AK12 Free 3D Model Assault Rifle” (AK12 - 3D Model Assault Rifle - Download Free 3D model by momsboxtv [d431b6b] - Sketchfab) by momsboxtv is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

“AK-12” (AK-12 - Download Free 3D model by rwroclav [f78ad7a] - Sketchfab) by rwroclav is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

“PKM” (PKM - Download Free 3D model by Ivan Norman (@vanidza) [4e44b6c] - Sketchfab) by Ivan Norman is licensed under Creative Commons Attribution-NonCommercial (Creative Commons — Attribution-NonCommercial 4.0 International — CC BY-NC 4.0).

“AK74M Assault Rifle” (AK74M Assault Rifle - Download Free 3D model by creationwasteland [8eea0d0] - Sketchfab) by creationwasteland is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

“ak 74m” (ak 74m - Download Free 3D model by Stos (@stasseli0) [73753f3] - Sketchfab) by Stos is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

[Petition2God]

Hi all,

This was posted on a different thread related to Javelin, but wanted to post it again on my upcoming 3D print project discussion.

I have recently acquired STL file for this Ukrainian soldier by making a donation. The proceeds from STL file sales go to support a good cause. Any takers?
I am planning to sell this 3D printed figure at 8 USD (S&H separate) each in 1/35.

How it appears on my CAD software:

The artist nicely put their arm patch on it:

I may be able to switch his weapon to something you can pick from my listed Russian weapons posted above.

"These figures were designed by Ukrainian sculptor Nikita Klimenko (find him here https://www.artstation.com/gwin and here https://www.instagram.com/gwinpaket/) to raise funds for the defense of Ukraine.

All donations raised by this 3D print file will go directly to the National Bank of Ukraine’s special fundraising account for Ukraine’s armed forces (NBU Opens Special Account to Raise Funds for Ukraine’s Armed Forces (updated))."

The following one, I have not donated yet but I do plan on making a donation and want to gauge Armoramans’ interest in purchasing 3D prints?

This one, I’ll sell a 3D print for 12 USD (S&H separate) each in 1/35 b/c it includes an NLAW.

For more info, go to Ukraine Fundraiser (if you have a 3D printer already, you can support them by buying an STL file). Thank you.

[Petition2God]

Some new items printed today:
1/35 The DShK machine gun:

Uzi

More Galil ARM

“Galil ARM” (Galil ARM - Download Free 3D model by Andrey Logunov (@Andrey_Logunov) [1024435] - Sketchfab) by Andrey Logunov is licensed under Creative Commons Attribution (Creative Commons — Attribution 4.0 International — CC BY 4.0).

[Petition2God]

Printed the UA soldiers in 1/35:

A toilet in 1/35 printed today:

One more thing CADed tonight:
US 120mm mortar round:

Reference photos:

[Petition2God]

3D printed the 120mm mortar rounds in 1/35:

Some of the thin fins broke while removing the supports…

Printed some weapons for the heck of it:
M14 EBR

Stock extension could use more straight styrene rod replacement.

AK-74M

Some British small arms