Ready for final assembly!
The F-117 turned out great! You did a great job on the black.
Gary
Thanks but I can’t take credit for that—Mr. Surfacer from a rattle can is amazing stuff.
Added landing gear etc and unmasked the canopy, decided to keep this one completely clean..
Makes my entrie finished, thanks for the nice campagne and good luck to everyone who’s still in it ![]()
Beautiful build, Bert! I understand why you wanted to keep it clean. It looks good - and especially in peacetime a lot of planes are kept in excellent condition.
A sharp looking model. Love how you handled the yellow, a hard color to get right. Well done!
Gary
Thanks very much guys!
That T-Bird is a real head turner, good work. What kit was it?
Paul
Thanks!
Thanks Bert, I remember asking that before. I have their C-46 in 1/144 but have not built it yet.
The old Minicraft 1/144 Super Constellation in National Air Lines Super H markings has been moving along. The decals were old and some broke up on application. The pinstripes on the wings and horizontal tail took a lot of work & time. It was “white knuckle” decaling for sure. For the most part, the decals settled down onto the surface well and once down stayed down. The de-icer boots being the excerption, no amount of thought, time or colorful language helped them, especially on the tail surfaces. I ended up cutting most of the down and using an AK marker in Rubber Black to complete this job.
Minicraft provided no antennas of any sort so everything had to be scratch built or sourced from the spares box. The rigging was straightforward, the biggest problem was finding a way to grip the model while working the EZ Line. The little jig was very helpful in this process.
There was a bit of a mystery with the top three antenna lines. It looked like they needed to terminate in the de-icer boots of the vertical tail fins, not likely to my mind. Happily, I have a number of Connie books and found some detail photos showing that the lines entered the sides of the fins, not the leading edge.
Here it is, up on its gear. The exhaust streaking was kept to a minimum as this bird was only in service for a few years and National looks to have kept its birds looking sharp.
Paul
Here is the National Air Lines Super Constellation Super H completed. BTW, the Super H was basically the sames as a Super G but with a convertible passenger/freight configuration. Supposedly this task took only one hour . . .
I notice in the pictures that the props are not all straight. The kit is designed to use retainers so the props will spin, a dubious feature in my eyes. I leave off the retainer and use a tiny bit of BluTack to hold them in place but still allow them to be posed. I will adjust these.
By the time this aircraft was delivered to National in 1957, Boeing was well along with the test program on the 707. Indeed, National and perhaps other airlines thought of these later Super Connies as interim aircraft pending delivery of 707s or DC-8s. Before National took delivery of the last of their four Connies, they were already considered obsolete.
Here the Connie is along side of a 1937 DC-3 & and a 1959 707.
Paul
Beautiful plane![]()
![]()
![]()
I remember as a kid having a toy one in metal, with a pin sticking out the top to lower or raise the fuselage ![]()
Beautiful rendition of a classic aircraft! You almost have a history of aviation going there, what with the earlier Ford Tri-motor.
Gary
That F-117 came out really well. I saw one of these when they were still new and highly secret at the El Centro airshow. It had a cordon around it so the public couldn’t get close and it was patrolled by several SP officers armed with shotguns loaded with buck, I asked. They took security very seriously. The aircraft looked immaculate, much like your model, great work!
Paul
I love this Connie!!!
Amazing finish!!!
I have a couple of completions to depict today, both long running projects that were conversions from military aircraft kits to the original civilian airline birds. The Northwest L-14H Super Electra had Pratt & Whitney Hornets of 850 hp. It was built from the MPM Hudson kit and needed a new nose with a clear perspex nose cap to keep the DF loop out of the weather. It also needed a new flight deck as the Hudson was very different in that area,
The other is a Mid Continent L-18 Lodestar with the 1200 hp Wright Cyclones. The Lockheeds excelled at speed rather than hauling capacity which rendered the market for these aircraft limited in the era of the DC-3.
In both models, Draw decal sets were used. These are excellent quality but are continuous film meaning the are best used with a close cut. They can also be fragile so care is needed in application. Complete build stories can be found in the thread above.
Now, on to that early L-749 Constellation in 1/72 scale. It will make an interesting comparison with the two aircraft here.
Paul
Wow. Those look great!
Beautiful T-Bird.
![]()
Great job on both the 14 and 18, Paul! Quite a collection.
Gary






































