look up syrian sarab.
1 Like
on Cults3D you can find the STL file of both version for the SARAB
I just shipped out 2 HEMTT light sets to Europe and shipping came out to a whopping $81 for both of them. Unfortunately, I think I have to institute: A) a minimum order amount of $35 for shipping internationally, and B) any order below the minimum going international will have to have a shipping charge at cost. Shipping domestic doesn’t need a minimum order amount. I typically factor in domestic shipping into the price for everything already, international shipping is just much more expensive.
Now I have another gun to announce! This time a “Type 1” AK-47. I wanted to switch things up from my current projects and work on something quick for a little bit. This was designed using AK-47/AKM blueprints so it’s completely accurate. It will be available in 1/16 and 1/35 like shown here. Next I’ll be making the Type 3 and then the AKM. I’m skipping the Type 2 because it wasn’t all that common and there are very few differences between it and the Type 3. At least none that will appear on the prints. As with all my 1/35 gun sets, it comes as a set of 6 with 12 magazines. 1/16 sets come as sets of 4 with 8 magazines.
Some tie downs that printed pretty well. These will be sold as a set of 100. There’s 10 to one row so… 10 rows, 100. Because there’s so little resin used and it takes so little time to print, it’s probably only $5 or $6 plus shipping.
And now for a 1/16 M4 carbine. This one has a CompM2 with an AN/PAQ-4C laser designator and Surefire M600 Scout light.
A different M4 carbine with a M150 ACOG, AN/PEQ-15 laser, Surefire M951 light, and M203 grenade launcher. But you can see the honeycomb of the anti-reflection device. I think it came out pretty well.
And I just want to make it known, that everything I sell and show off here is designed solely by myself. I never download anything to print and resell. I do download things from time to time but they’re always for my personal use and I don’t resell them. Like this little shark. I downloaded and printed him to give as a gift to my manager who’s moving locations.
4 Likes
Tie downs, yes…
2 Likes
I’ll shoot you a PM.
If anyone wants anything that I offer, shoot me a PM. I’ll be posting a price list here pretty soon.
2 Likes
The price list is here. It’s pretty long because I have so much available. There’s a lot that I didn’t list because I haven’t priced them out and they didn’t seem to provide enough to list them. There’s some without prices here that I haven’t priced yet but they did seem significant enough to warrant listing them.
1/16:
-
MSP16-017 1/16 SINCGARS Radio Set $19.89
-
MSP16-021 1/16 EoTech Holographic Sights Set $9.70
-
MSP16-022 1/16 Pintle Hitches Open/Closed $9.20
-
MSP16-023 1/16 HK M27 IAR x4 $16.36
-
MSP16-024 1/16 Mk 18 Mod 1 x4 $17.60
-
MSP16-025 1/16 Mk 18 Mod 0 x4 $17.60
-
MSP16-026 1/16 M4A1 Carbine x4 $17.80
-
MSP16-027 1/16 M4A1 Carbine w/ M203 x4 $17.60
-
MSP16-028 1/16 PEQ Set $8.28
1/35:
-
MSP35-002 1/35 AN/VIC-3(V) Intercom Set $10.13
-
MSP35-003 1/35 AN/VIC-5(V) Intercome Set $10.81
-
MSP35-004 1/35 AN/VIC-1 Intercom Set
-
MSP35-007 1/35 M3 Stuart Headlight Guards $7.54
-
MSP35-013 1/35 AN/VIC-2 “Pre-SINCGARS” Intercom set
-
MSP35-014 1/35 AN/VIC-2 “Post-SINCGARS” Intercom set
-
MSP35-022 1/35 M1068 Auxiliary Power Unit $13
-
MSP35-025 1/35 SINCGARS Radio Set $9.87
-
MSP35-028 1/35 M85 .50 Cal Machine Gun Barrels $8.31
-
MSP35-030 1/35 AN/VRC-12 Radios
-
MSP35-032 1/35 Shillelagh Missles
-
MSP35-034 1/35 CheyTac M200 Intervention x2
-
MSP35-035 1/35 CheyTac M200 Intervention w/ Suppressor x2
-
MSP35-040 1/35 McMillan TAC-50 x2
-
MSP35-042 1/35 NATO Slave Cable Ends
-
MSP35-043 1/35 M256 120mm Gun for Meng M1 Abrams $13.22
-
MSP35-044 1/35 US General Purpose First Aid Kit $6.55
-
MSP35-048 1/35 Classic Coke Bottles $6.49
-
MSP35-051 1/35 HCU-6E Pallet x1 $11.50
-
MSP35-052 1/35 Plastic Bottles $6.41
-
MSP35-053 1/35 Soda Cans $5.50
-
MSP35-055 1/35 Reconfigurable Integrated Weapons Platform (RIWP) Turret kit
-
MSP35-057 1/35 QF 183mm/L4 Gun Barrel $15.52
-
MSP35-059 1/35 Tie Downs x100 $5.49
-
MSP35-071 1/35 AN/VRC-110 Radios $9.95
-
MSP35-072 1/35 AN/VRC-111 Radios $8.87
-
MSP35-073 1/35 RPG-29
-
MSP35-075 1/35 PPS-43 SMG
-
MSP35-084 1/35 M110 SASS x6 $12.40
-
MSP35-086 1/35 FN SCAR SSR Mk 20 Mod 0
-
MSP35-087a 1/35 SIG Sauer M17 MHS $6.72
-
MSP35-093 1/35 Tavor X95
-
MSP35-094 1/35 L129A1 Sharpshooters Rifle
-
MSP35-095 1/35 M110 SASS w/ AN/PVS-27 $12.40
-
MSP35-096 1/35 Gun Display Units (for M777 and other towed artillery) $8.50
-
MSP35-098 1/35 SIG Sauer XM5 NGSW x6 $14.52
-
MSP35-099 1/35 Insurgent Makeshift Gun Shield $14.00
-
MSP35-101 1/35 Mk 18 Mod 1 x6 $10.30
-
MSP35-105 1/35 HK M27 IAR x6 $12.40
-
MSP35-106 1/35 Mk 18 Mod 0 x6 $10.30
-
MSP35-107 1/35 M4A1 Carbine x6 $11.30
-
MSP35-108 1/35 M4A1 Carbine w/ M203 x6 $11.60
-
MSP35-109 1/35 M16A4 x6 $12.40
-
MSP35-110 1/35 M16A4 w/ M203 x6 $12.70
-
MSP35-111 1/35 M16A2 x6 $12.40
-
MSP35-112 1/35 M16A2 w/ M203 x6 $12.70
-
MSP35-113 1/35 M16A1 x6 $12.40
-
MSP35-114 1/35 M16 x6 $12.40
-
MSP35-115 1/35 PA-120 40mm Ammo Cans $10.00
-
MSP35-116 1/35 30-ton Tow Shackles x6 $8.50
-
MSP35-117 1/35 HCU-6E Doubled $14.75
-
MSP35-118 1/35 Larkspur Radios $8.87
-
MSP35-119 1/35 Vehicle Side Marker Lights x60 $6.00
-
MSP35-120 1/35 Mermite Insulted Food Containers $10.74
-
MSP35-121 1/35 Bremer Wall Type 1 Base x2 $16.90
-
MSP35-122 1/35 Bremer Wall Type 2 Base x2 $16.90
-
MSP35-123 1/35 Bremer Wall Type 1 Short x2 $12.80
-
MSP35-124 1/35 Bremer Wall Type 2 Short x2 $12.80
-
MSP35-125 1/35 Texas T-Wall Barrier x2 $16.90
-
MSP35-126 1/35 Texas T-Wall Short x2 $12.80
-
MSP35-127 1/35 Japanese Lunge Mine x6 $10.00
-
MSP35-128 1/35 CLAMS System $10.34
-
MSP35-129 1/35 AK-47 x6 $11.30
1/350:
- MSP03-006 1/350 USC-38 and WSC-65 SATCOM Domes $7.34
1/700
- MSP70-007 1/700 USC-38 and WSC-65 SATCOM Domes $6.07
5 Likes
Are your tie downs same as footman loops?and can you show pic of mk18 mod 0 and can you make the 40mm cans open and also separate 40mm rounds,I can fab the belt with tape
I believe the tie-downs are the same as footman’s loops, yes.
Surprisingly, out of all of them I’ve printed, I haven’t taken a picture of the Mk 18 Mod 0s. I’ll get on that when I get home.
And yeah, I can model them open along with some rounds. Someone else also asked me for the rounds but I had forgotten about it until now.
1 Like
I would want maybe 100 40mm rounds also an early model mk19 both were used in the ‘nam as that is my modeling thing,
Unfortunately I don’t have a Mk 19 grenade launcher but I can highly recommend Live-Resin’s or Legend’s kits.
I can recommend @MikeyBugs as honest and helpful. If there is a 3D printing problem, Mike will offer solutions to fix it—that is excellent Customer Service.
3 Likes
Very professional looking product. Well done Mike!
Mario
1 Like
Thanks for the kind words! If anything doesn’t fit, let me know what’s wrong and I can adjust the model and send the corrected parts.
Thanks. I have some review samples I’ve been meaning to send out. Some with you in mind. I really should get on that.
Also, I updated the rockets on my RPG-29 Vampir. Now they have fins! Always a good thing to have for a rocket.
And in a little different environment. Not sure about this one but I kind of like it.
1 Like
Looks good Mike. The only comment I would add is perhaps you could provide some sort of cutting guide for the fins? My guess is that this resin material for the fins will not survive even packing and shipping. First thing I would do is Xacto trim fins from brass sheet. I understand that you do not have access to photo etch, but a box that would guide a knife around a pattern would be useful. My first thought is an oversized outline of some kind? Just saying. You are clever and have a lot of good ideas. Many thanks my friend! Love your stuff
2 Likes
I think this might be a doable solution? The rocket and two case halves are printed separately and then mated together. There are cutouts for the fins and rocket body so it holds the rocket in place. The only fins that positively mates inside the case are the 2 fins vertical to us. I didn’t intend it but there’s also space for two of the folded-fins rockets. The case can be taped together. I’ll give it a shot. If it works, great, if not… I’ll try to think of something else. Unfortunately the fins are so small, I’m not sure how well an outline would work. PE obviously would be best though.
1 Like
Well, I have to admit I would love to see your stuff up close and personal. Let me know what you had in mind.
Mario
Mike! That would take care of shipping but then I would touch it!! Fins would be gone. LOL Wish there was an outline with some known offset that would guide a pencil or a knife for marking?